Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
2D AutoCAD File Import in Comsol 4.4
Posted 2015年2月4日 GMT-5 22:50 Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
I have this micro-channel geometry that I am importing into Comsol from a 2D AutoCAD drawing saved in .dxf format in AutoCAD 2013. I have space in-between consecutive channels and when I import it as a solid, it is recognizing that space as a solid and making the space as a part if the solid domain. Can you please suggest ways to recognize the intended space between channels as space rather than solid. I have attached a screen shot of the converted model and my AutoCAD model and visually explained the problem better.
Thank you
Thank you
Attachments:
1 Reply Last Post 2015年2月11日 GMT-5 16:21
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi,
I am not sure about your model and its detail.
But, I imported a solid cube from the AutoCAD to COMSOL using IGES extension in AutoCAD. You only need to export your model to IGES format in AutoCAD then Import it to COMSOL in the Geometry node. I did not get any problem and my model worked well.
I am not sure about your model and its detail.
But, I imported a solid cube from the AutoCAD to COMSOL using IGES extension in AutoCAD. You only need to export your model to IGES format in AutoCAD then Import it to COMSOL in the Geometry node. I did not get any problem and my model worked well.