Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

initial parameter problem

Please login with a confirmed email address before reporting spam

Hi,
I try to assembly three 2-D models in comsol. When I extruse one of the boundary value in a 2-D domain toward to another boundary of 2-D domain as boundary value. In the stationary slover condition, COMSOL does not work and give the following information:

Error:
Failed to find a solution for the initial parameter:
The relative error (0.00037) is greater than the relative tolerance.
Returned solution has not converged.

How can I do in the next ? thanks a lot !

1 Reply Last Post 2010年9月17日 GMT-4 20:12
COMSOL Moderator

Hello Guangji Ji

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2010年9月17日 GMT-4 20:12
Same problem here with the AC/DC electric currents 3D app. mode. I am using the paradiso solver through matlab (comsol 3.5a). If I would be using comsol multiphysics directly, I would try changing the relative tolerance on the nonlinear settings within the stationary solver settings. What is the string necessary to change this property through scripting?

Thanks
Same problem here with the AC/DC electric currents 3D app. mode. I am using the paradiso solver through matlab (comsol 3.5a). If I would be using comsol multiphysics directly, I would try changing the relative tolerance on the nonlinear settings within the stationary solver settings. What is the string necessary to change this property through scripting? Thanks

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.