Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Wall Shear stress

Posted 2015年6月29日 GMT-4 12:42 Fluid & Heat 2 Replies

Djalal Sekhane
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone
In several articles I heard about wall shear stress(WSS), but in comsol i don't know if it's possible to calculat. So what's the term used to mesure or calculate WSS in comsol? and if there are some exemples ( cylinders, web tubes)
thanks

2 Replies Last Post 2015年6月29日 GMT-4 19:21
Lasse Murtomäki
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年6月29日 GMT-4 13:07
Shear stress = shear rate*solution viscosity. If you are using Laminar Flow physics (spf), shear stress = spf.sr*spf.mu where spf.sr is the shear rate and spf.mu solution viscosity. Of course you can give the viscosity as your own parameter.

br
Lasse
Shear stress = shear rate*solution viscosity. If you are using Laminar Flow physics (spf), shear stress = spf.sr*spf.mu where spf.sr is the shear rate and spf.mu solution viscosity. Of course you can give the viscosity as your own parameter. br Lasse
Djalal Sekhane
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2015年6月29日 GMT-4 19:21
hi
thanks for the answer, but what's the difference between Wall Shear Stress and the Total Stress
thank againe
best regards

hi thanks for the answer, but what's the difference between Wall Shear Stress and the Total Stress thank againe best regards

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content