论文和技术资料

快速搜索

技术资料

白皮书和应用说明

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2020 论文

搜索：

Optimization of Acoustic Silencer for the Screw Compressor System

M. Swamy[1], L. J. van Lier[1], J. Smeulers[1]
[1]TNO, Delft, The Netherlands

In one of the screw compressor system, designed silencer was not optimal. A great challenge was the large ... 扩展阅读

Fresh Produce Safety During Hydrocooling: An Engineering Model

A. Warning[1], A. K. Datta[1]
[1]Department of Biological & Environmental Engineering, Cornell University, Ithaca, NY, USA

Hydrocooling is the process by which warm produce is chilled with water. The chilling of warm produce ... 扩展阅读

Numerical and Experimental Studies of a Capillary Channel

M. Xu[1], Z. Wu[1], X. Wang[1]
[1]Tsinghua University, Beijing, China

Capillary effects are common in microfluidics due to large surface-to-volume ratio of flows inside ... 扩展阅读

Simulation of Cellular Traction Force Based Deflection of PDMS Micropillars

J. Wala[1], D. Maji[1], S. Dhara[1], S. Das[1]
[1]Indian Institute of Technology Kharagpur, Kharagpur, West Bengal, India

Cells are complex entities which not only passively sense external stimuli (viz. chemical, optical or ... 扩展阅读

3D Modelling of Flow Dynamics in Packed Beds of Low Aspect Ratio

F. Alzahrani[1], F. Aiouache[1]
[1]Engineering Department, Lancaster University, Lancaster, UK

This work used the 3D CFD modeling to investigate non-uniform deactivation in packed bed reactors of low ... 扩展阅读

An Improved Loudspeaker Frequency Response by Using a Structure of Rigid Absorptive Panel in a Vented Cabinet

R. Balistreri[1]
[1]Community Light & Sound Inc., Chester, PA, USA

When placing a loudspeaker in a cabinet, standing waves inside the cabinet affect the frequency response with ... 扩展阅读

Modeling of Directional Dependence in Nanowire Flow Sensor

A. Piyadasa[1,3], P. Gao[1,2,3]
[1]Department of Physics, University of Connecticut, Storrs, CT, USA
[2]Department of Materials Science & Engineering, University of Connecticut, Storrs, CT, USA
[3]Institute of Materials Sciences, University of Connecticut, Storrs, CT, USA

3D finite element analysis model has been constructed for testing the directional dependence in a novel form ... 扩展阅读

COMSOL Multiphysics® Based Identification of Thermal Properties of Mesoporous Silicon by Pulsed Photothermal Method

N. Semmar[1], I. El Abdouni[1], A. Melhem[1]
[1]GREMI-UMR7344, CNRS/University of Orléans, Orléans, France

The silicon is mainly known under its single-crystal shape and polycrystalline. Since a few decades, a new ... 扩展阅读

Characterization of the Process of Ultrasound Driven Dispersion of Nanoparticles in High Viscosity Liquids

P. Pasumarty[1], H. Choi[1]
[1]Clemson University, Clemson, SC, USA

Even though sonochemical reactors have been studied extensively for decades, there is limited data on their ... 扩展阅读

Modeling Heat and Moisture Transport During Hydration of Cement-Based Materials in Semi-Adiabatic Conditions

E. Hernandez-Bautista[1,2], D. Bentz[1], S. Sandoval-Torres[2], P. Cano-Barrita[2]
[1]National Institute of Standards and Technology, Gaithersburg, MD, USA
[2]Instituto Politécnico Nacional/CIIDIR Unidad Oaxaca, Oaxaca, México

The process of accelerated curing of pre-cast concrete has a significant importance in the thermal behavior ... 扩展阅读

第一页

181–190 of 503

最后一页