论文和技术资料

快速搜索

技术资料

白皮书和应用说明

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2020 论文

All

Boston 2024

Florence 2024

搜索：

Batteries, Fuel Cells, and Electrochemical Processes

Design and Simulation of MEMS Based Piezoelectric Vibration Energy Harvesting System

M. C. B. Kumar[1], D. B. Prabhu[1], R. Akila[1], A. Gupta[1], M. Alagappan[1]
[1]PSG College of Technology, Coimbatore, Tamil nadu, India

This paper discusses the simulation studies on a vibration based energy harvesting system to convert the ... 扩展阅读

Modeling of Supercapacitor

G. Madabattula[1], S. K. Gupta[1]
[1]Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India

Low cost high energy density batteries that can be charged and discharged rapidly are required in a number of ... 扩展阅读

Current Density Distribution and Material Removal Behavior on the Graphite/Iron-matrix Interface in Cast Iron Under Pulse Electrochemical Machining Conditions

O. Weber[1], R. Kollmannsperger[2], D. Bähre[2]
[1]Center for Mechatronics and Automatization, Saarbrücken, Germany
[2]Institute of Production Engineering, Saarland University, Saarbrücken, Germany

The Pulse Electrochemical Machining is especially suitable for the precise production of complex geometric ... 扩展阅读

Three Dimensional Modeling of PEM Fuel Cells with Current Collection from the Gas Diffusion Layer

R. Pushpangadan[1], A. Soman[2], Arundas R.[2], N. G. Thoppan[2], S. P. Duttagupta[1]
[1]Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
[2]College of Engineering, Munnar, Kerala, India

PEM fuel cells are very promising for portable applications. A key component of fuel cell is the flow field ... 扩展阅读

Modeling of Lead-acid Flow Battery

M. N. Nandanwar[1], S. K. Gupta[1]
[1]Indian Institute of Science, Bangalore, India

Failure of conventional lead-acid battery is attributed to degradation of solid active mass (PbO2 and ... 扩展阅读

Design and Simulation of Sensors to Detect Methanol

C. K. Subramaniam[1], Muthuraja[1]
[1]School of Electronics Engineering, VIT University, Vellore, Tamil Nadu, India

The Direct Methanol Fuel Cell (DMFC) working is dependent on the concentration of methanol in water before it ... 扩展阅读

Modeling of HTPEM Fuel Cell Start-Up Process by Using COMSOL Multiphysics

Y. Wang[1], D. Uwe Sauer[1]
[1]Electrochemical Energy Conversion and Storage Systems, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, Aachen, Germany

HTPEM fuel cells are considered to be the next generation fuel cells. The electrochemical kinetics for ... 扩展阅读

Heat Pipe Assisted Thermal Management of an HT PEMFC Stack

E. Firat[1], G. Bandlamudi[1], M. Crisogianni[1], P. Beckhaus[1], A. Heinzel[1]
[1]Centre for Fuel Cell Technology (ZBT), Duisburg,NRW, Germany

Heat management is crucial for the satisfactory operation of HT-PEM (High temperature polymer-electrolyte ... 扩展阅读

Comparison Between Turbulent and Laminar Bubbly-Flow for Modeling H2/H2O Separation

E. Amores Vera[1], J. Rodríguez Ruiz[1]
[1]Centro Nacional del Hidrógeno, Puertollano, Spain

One of the most critical aspects on water electrolysis is gas-liquid separation, especially in systems with ... 扩展阅读

Simulation of Current Density for Electroplating on Silicon Using a Hull Cell

F. Lima[1], U. Mescheder[1], H. Reinecke[3]
[1]Hochschule Furtwangen University, Furtwangen, Baden-Wuerttemberg, Germany
[3]Institut für Mikrosystemtechnik, Freiburg im Breisgau, Baden-Wuerttemberg, Germany

Electrodeposition has a major advantage over other methods of thin film deposition. It allows deposition at ... 扩展阅读

第一页

241–250 of 346

最后一页