论文和技术资料

快速搜索

技术资料

白皮书和应用说明

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

All

Boston 2024

Florence 2024

搜索：

Computational Fluid Dynamics

Measuring and Calculation of Positive Corona Currents Using COMSOL Multiphysics^®

M. Quast[1] and N.R. Lalic[1]
[1]Gunytronic GmbH, St Valentin, Germany

The sensor type developed by Gunytronic uses corona discharge for measuring flow rates in exhaust streams of ... 扩展阅读

Bio-Effluents Tracing in Ventilated Aircraft Cabins

G. Petrone[1], L. Cammarata[1], and G. Cammarata[1]
[1]Department of Industrial and Mechanical Engineering, University of Catania, Catania, Italy

Ventilation and Indoor Air Quality (IAQ) are issues of very high interest, determining comfortable conditions ... 扩展阅读

Virtual Experiments: Numerical Computations as a Powerful Tool for Engineers

P. Schmitz[1], A. Cockx[2], S. Geoffroy[3], and J. Gunther[1]
[1]Biochemical Engineering Dpt., Université de Toulouse, Toulouse, France
[2]Chemical Engineering Dpt., Université de Toulouse, Toulouse, France
[3]Mechanical Engineering Dpt., Université de Toulouse, Toulouse, France

An undergraduate course is developed to initiate future engineers to multiphysics numerical simulation by ... 扩展阅读

The Use of COMSOL in Teaching Heat and Moisture Transport Modeling in Building Constructions

A.W.M. van Schijndel[1] and H.L. Schellen[1]
[1]Eindhoven University of Technology, Eindhoven, The Netherlands

This paper presents the use of the multiphysics package COMSOL for teaching heat and moisture transport ... 扩展阅读

Simulations of Scanning Electrochemical Microscopy Experiments in Pure Negative and Positive Feedback Mode with Ring Microelectrodes

J. Mauzeroll[1], M. Mayoral[1], and D. Fabre[1]
[1]Department of Chemistry, Université du Québec à Montréal, Montreal, Quebec, Canada

Scanning electrochemical microscopy (SECM) is a powerful tool recently developed for studying structures and ... 扩展阅读

COMSOL Derived Universal Scaling Model For Low Reynolds Number Viscous Flow Through Microfabricated Pillars – Applications to Heat Pipe Technology

N. Srivastava[1], and C.D. Meinhart[1]
[1]Department of Mechanical Engineering, University of California Santa Barbara, Santa Barbara California, USA

Cooling of high-power density electronic devices remains a challenge. Microfluidic heat-pipes with the ... 扩展阅读

Studying Transition Flows for Low Prandtl Number Fluids

H. Jamai[1], A. Elamari[1], M. El Ganaoui[2], F.S. Oueslati[1], B. Pateyron [2], and H. Sammouda[3]
[1]LETTM, Département of physics, F.S.T, Tunisie
[2]SPCTS UMR CNRS, Faculte of Sciences, Limoges, France
[3]ESST-H., Sousse, Tunisie

COMSOL Multiphysics is offering an important alternative to home codes for modeling and simulation of complex ... 扩展阅读

3-D COMSOL Analysis of Extruder Dies

E. Solomon[1] and V. Mathew[1]
[1]Arcada University of Applied Sciences, Espoo, Finland

Three-dimensional flow analysis was performed by using COMSOL Multiphysics Chemical Engineering Module for ... 扩展阅读

Multiphysical Modeling of Calcium Carbonate Transportation in UV Disinfection in Water Treatment

E. R. Blatchley[1], and B.Z. Sun[1]
[1]Department of Civil Engineering, Purdue University, West Lafayette, IN, USA

Mineral precipitation on to the quartz surface of the lamp jackets in UV disinfection process (fouling) has ... 扩展阅读

Tilted Micro Air Jet for Flow Control

J. Malapert[1], R. Yahiaoui[1], R. Zeggari[1], and J-F. Manceau[1]
[1]Institut Femto-St, Université de Franche-Comté Besançon, France

In this paper, we present an interesting method to microfabricate a tilted micro air jet generator. We used ... 扩展阅读

第一页

911–920 of 1091

最后一页