论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2025 论文

搜索：

Shape, Convection and Convergence

R. Pryor
Pryor Knowledge Systems, Inc., Bloomfield Hills, MI, USA

COMSOL Multiphysics software, when properly configured, can readily solve modeling problems in the laminar ... 扩展阅读

Simulation of the Shape of Micro Geometries Generated with Jet Electrochemical Machining

M. Hackert[1], G. Meichsner[2], and A. Schubert[1,2]
[1]Micromanufacturing Technology, Chemnitz University of Technology, Chemnitz, Germany
[2]Fraunhofer Institute of Machine Tools and Forming Technology, Chemnitz, Germany

Electrochemical Machining with a closed electrolytic free jet is a special procedure to generate complex ... 扩展阅读

Computational Analysis of Hydrodynamics and Light Distribution in Algal Photo-Bioreactors

V. Loomba [1], E. von Lieres [1], G. Huber [1],
[1] Forschungszentrum Jülich, Jülich, Germany

Microalgae can be directly used in health food or as biofilters for waste water treatment. They also have ... 扩展阅读

3D Unsteady CFD with Heat and Mass Transfer Simulations of Solar Adsorption Cooling System for Buildings

W. Yaici [1], E. Entchev [1], J. Ranisau [1],
[1] CanmetENERGY Research Centre, Natural Resources Canada, Ottawa, ON, Canada

In recent years, extensive attention has been paid on the application of solar cooling for buildings. Amongst ... 扩展阅读

Exergy Analysis of Polymer Flooding in Clastic Reservoirs

A. Hassan [1], H. Bruining [2], T. Musa [3], R. Farajzadeh [2],
[1] Delft University of Technology, Delft, The Netherlands, and Sudan University of Science and Technology, Khartoum, Sudan
[2] Delft University of Technology, Delft, The Netherlands
[3] Sudan University of Science and Technology, Khartoum, Sudan

Using a 1-D model of polymer displacement, we analyze the exergy (maximum attainable work) balance of ... 扩展阅读

A 1-D Model of the 4 Bed Molecular Sieve of the Carbon Dioxide Removal Assembly

R. Coker [1], J. Knox [1],
[1] NASA Marshall Space Flight Center, Huntsville, AL, USA

Introduction: Developments intended to improve system efficiency and reliability for water and carbon dioxide ... 扩展阅读

Numerical Evidence of Unrest-Related Electromagnetic Effects in the Campi Flegrei Caldera, Italy

G. Perillo [1], G. De Natale [2], M. G. Di Giuseppe [2], A. Troiano [2], C. Troise [2],
[1] University of Naples Parthenope, Naples, Italy
[2] INGV – Osservatorio Vesuviano, Naples, Italy

Electric, magnetic and electromagnetic (em) methods are widely used to monitor active volcanoes. A review of ... 扩展阅读

Numerical Model for Predicting Heat and Mass Transfer Phenomena during Cake Baking

P. Le Bideau [1], R. Cutté [1], P. Glouannec [1], J. F. Le Page [2]
[1] Univ. Bretagne Sud, FRE CNRS 3744, IRDL, F-56100 Lorient, France
[2] DPP, ADRIA Développement, Quimper, France

A transient two-dimensional axisymmetric model is implemented in COMSOL Multiphysics® software to simulate ... 扩展阅读

Comparison of Diffusion Flux Models for Fischer-Tropsch Synthesis

A. Nanduri [1], P. L. Mills [1],
[1] Department of Chemical and Natural Gas Engineering, Texas A&M University - Kingsville, Kingsville, TX, USA

The Fischer-Tropsch Synthesis (FTS) is a highly exothermic condensation polymerization reaction of syngas (CO ... 扩展阅读

Poroelastic Models of Stress Diffusion and Fault Re-Activation in Underground Injection

R. Nopper[1], J. Clark[2], C. Miller[1]
[1]DuPont Company, Wilmington, DE, USA
[2]DuPont Company, Beaumont, TX, USA

Stress and failure in the earth have long been observed to couple to hydrogeology. Poroelastic models, ... 扩展阅读

第一页

161–170 of 321

最后一页