论文和技术资料

快速搜索

技术资料

白皮书和应用说明

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2020 论文

All

Boston 2024

Florence 2024

Voltage and Capacitance analysis of EWOD system using COMSOL

D. Das[1], S. Sohail[1], S. Das[2], and K. Biswas[1]
[1]Electrical Engineering Department, IIT Kharagpur, India
[2]School of Medical Science and Technology, IIT Kharagpur, India

Electrowetting on Dielectrics (EWOD)systems is widely practiced digital microfluidic technique, used in Lab ... 扩展阅读

Numerical Study on Mechanical Properties of Stents with Different Materials during Stent Deployment with Balloon Expansion.

P. Ghosh[1], K. DasGupta[1], D. Nag[2], and A. Chanda[1]
[1]School of Bio Science & Engineering, Jadavpur University, Kolkata, West Bengal, India
[2]Mechanical Engineering Department, Jadavpur University, Kolkata, West Bengal, India

The main reason for stent implantation is to provide mechanical support to the arterial wall. So it is ... 扩展阅读

Simulation of MEMS based Flexible Flow Sensor for Biomedical Application

D. Maji[1], C. P. Ravikumar[2], and S. Das[1]
[1]School of Medical Science and Technology, Indian Institute of Technology, Kharagpur, West Bengal, India
[2]Texas Instruments (India) Pvt. Ltd., Bangalore, India

Arterial disease, especially Coronary Artery Disease (CAD) is one of the leading causes of premature ... 扩展阅读

Multiphysics Modeling and Simulation of MEMS Based Thermal Bimorph Sensor Array for Automated Solar Energy Storage Applications

K. Umapathi, V. K. Kanna, R. Gowthami, M. Alagappan, and A. Gupta
PSG College of Technology
Coimbatore
Tamil Nadu, India

Two bimorph array facing opposite to each other are designed and attached with metal micro plates. The micro ... 扩展阅读

3-D Design, Electro-Thermal Simulation and Geometrical Optimization of Spiral Platinum Micro-Heaters for Low Power Gas Sensing Applications Using COMSOL 4.1

V. Bansal, D. Kumar, B. Prasad, and A. Gujjar
Electronic Science Department

In this paper a thermal electric finite element method (FEM) analysis was used to investigate the thermal ... 扩展阅读

Simulation of Fast Response Thermocouple for the Nuclear Reactor Core

K. Dusarlapudi[1], B. K. Nashine[2], D. Bai[3], and C. S. Babu[1]
[1]KL University, Vaddeswaram, Guntur, Andhra Pradesh, India
[2]E.D&S.S, IGCAR Kalpakkam, India
[3]VIT, Vellore, India

Thermocouples have been used for measurement of temperature ever since the discovery of Seebeck effect. ... 扩展阅读

Modeling of Limestone Calcination Using Joule Heating

R. Kancharla, and M. Ramakrishna
Padmasri Dr. B.V.Raju Institute of Technology
Narsapur
Medak Dist, AP, India

The limestone calcination reaction is endothermic and will proceed only if the partial pressure of CO2 in the ... 扩展阅读

A Wide Range MEMS Vacuum Gauge Based on Knudsen’s Forces

V. Sista, and E. Bhattarchaya
Microelectronics and MEMS Lab
Department of Electrical Engineering
Indian Institute of technology Madras
Chennai, India

A MEMS based Knudsen’s pressure gauge working in the range of 1e-5 mbar to 10 mbar is designed and simulated ... 扩展阅读

Non Linear Mechanical and Poromechanical Analyses: Comparison with Analytical Solutions

M. Souley, and A. Thoraval
INERIS
Ecole des Mines
Parc de Saurupt, France

The long-term behaviour of the underground excavations is a social and economic challenge particularly in the ... 扩展阅读

Fluid Structure Interaction Applied to Upper Aorta Blood Flow

J. Anza[1], and M. Esteves[2]
[1]Department of applied mathematics, University of the Basque Country, Bilbao, Spain
[2]University of the Basque Country, Bilbao, Spain

This work deals with the computer simulation of the blood flow, the arterial wall deformation and their 3D ... 扩展阅读

第一页

4231–4240 of 5989

最后一页