论文和技术资料

快速搜索

技术资料

白皮书和应用说明

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

搜索：

Uncertainty Assessment and Sensitivity Analysis of Heat Generation within a Lithium-Ion Battery

G. Liebig [1], G. Gupta [1], K. Derendorf [1], C. Agert [1],
[1] DLR Institute of Networked Energy Systems, Oldenburg, Germany

Dedicated work in modeling, simulation and design optimization of Lithium-ion Battery (LIBs) was done in the ... 扩展阅读

Implementation of an Active Fluid Cooling Design in a 48 V High-Power Battery Module

Z. Wu [1], A. Stawarski [2], H. Kemper [2],
[1] Energy Storage Systems, FH Aachen - University of Applied Sciences, Aachen, Germany; RWTH Aachen University, Aachen, Germany
[2] Energy Storage Systems, FH Aachen - University of Applied Sciences, Aachen, Germany

Individual batteries have their own operational temperature ranges, which shall be respected to avoid both ... 扩展阅读

Fluid Dynamics & Electrochemical Kinetics in Annular Reactors: A Study for Resource Recovery

Ardavan Zanganeh¹, Damilola A. Daramola¹
¹Northeastern University, Boston, MA, US

Sustainable wastewater management has stimulated the exploration of innovative technologies, such as ... 扩展阅读

Computational Optimization of Battery Grid for Efficiency and Performance Improvement

V. Panneerselvam [1], R. C. Thiagarajan [1]
[1] ATOA Scientific Technologies Pvt Ltd, Bengaluru, India

Battery grids are critical system used in automobile, renewable energy, medical devices and mobile phones. ... 扩展阅读

Electrochemical Li-Ion Battery Modelisation for Electric Vehicles

A. Falconi [1], D. Sicsic [2], R. Cornut [3], C. Lefrou [4]
[1] Renault s.a.s, CEA/DSM/IRAMIS/NIMBE/LICSEN, Université de Grenoble Alpes, Grenoble, France
[2] Renault s.a.s, Renault technocentre, Guyancourt, France
[3] CEA/DSM/IRAMIS/NIMBE/LICSEN, Gif Sur Yvette Cedex, France
[4] Université de Grenoble Alpes, LEPMI, CNRS, Grenoble, France

The future development of electric vehicles is now strictly linked with their batteries. In parallel of the ... 扩展阅读

Thermal Analysis Of A Sealed Battery Power System Enclosure For Underwater Operations

C. H. King Joel [1]
[1] Temasek Polytechnic, Singapore

COMSOL Multiphysics was used to simulate the heat flux from battery cells via conjugate heat transfer physics ... 扩展阅读

电化学-力学耦合分析硅阳极中固体电解质界面的失效

谈鹏¹, 丁俊杰¹, 谈鹏¹
¹中国科学技术大学

使用COMSOL Multiphysics计算了硅基锂离子电池在不同硅颗粒大小，电池放电倍率及固体电解质界面几何均匀性三个条件下SEI的稳定性。仿真结果表明，当硅颗粒半径从800 nm减小到600 nm和400 nm时 ... 扩展阅读

Analytical, COMSOL Simulation Optimization Of Vibration-Based Energy Harvesters For EV Applications

Chandan Pandey¹, Barun Pratiher¹
¹Indian Institute of Technology Jodhpur Rajasthan India 342037

Vibration-based Piezoelectric Energy harvesters convert ambient vibration energy into an applicable ... 扩展阅读

Topology Optimization of Lithium-Ion Battery Electrode Microstructure Morphology for Reduction of Damage Accumulation and Longevity of Battery Life

P. Clarke[1], R. Abedi[1]
[1]University of Tennessee Space Institute, Tullahoma, TN, USA

The ubiquitous commercial use of Lithium-Ion batteries (LIBs) has increased interest in their implementation ... 扩展阅读

COMSOL在锂离子电池性能表征方面的应用

杨柳¹, 方小辉¹, 赵贝贝¹, 王欣¹, 蒋治亿¹
¹江苏天合储能有限公司江苏常州

为了实现锂电池电芯设计定向优化及评估析锂风险，如Fig.1所示，本工作利用COMSOL的“电池模块”中的“Lithium-ion battery”物理接口，基于Dolye等[1]的伪二维（P2D）模型 ... 扩展阅读

第一页

41–50 of 225

最后一页