论文和技术资料

快速搜索

技术资料

白皮书和应用说明

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2024 论文

搜索：

HETT22 – A COMSOL® App to Accurately Simulate, Plan and Monitor Concrete Castings

Daniel Ericsson¹, Mikael Westerholm², Tom Fredvik³, Mats Emborg⁴, Jonas Carlswärd⁴
¹Deflexional AB, Sweden
²Heidelberg Materials Cement Sverige AB, Sverige
³Heidelberg Materials Sement Norge AS, Norway
⁴Heidelberg Materials Betong Sverige AB, Sweden

HETT22 is a software developed through joint efforts by Deflexional and Heidelberg Materials. It enables ... 扩展阅读

Reinforcement Bars Corrosion in a Carbonated Concrete

Bruno Chiné¹, Ronald Jiménez Salas¹, Rommel Cuevas Kauffmann²
¹School of Materials Science and Engineering, Costa Rica Institute of Technology Cartago, Costa Rica
²School of Construction Engineering, Costa Rica Institute of Technology Cartago, Costa Rica

In the construction sector, the concrete and the steel bars represent still the key components, although they ... 扩展阅读

Ladle furnace preheating and charge heating with graphite heating rods

Sergey Semenov¹, Patrick Namy¹, Aditya Kale², Sello Tsebe²
¹SIMTEC, Grenoble, France
²MINTEK, Randburg, South Africa

Present work is done in the framework of the SisAl Pilot EU project, which aims at optimising the silicon ... 扩展阅读

Multiphysical Optimization of the Next Generation of Energy Efficient High Temperature Furnaces

Karl-Heinz Leitz¹, Bernhard Valentini¹
¹PLANSEE SE, Metallwerk-Plansee-Straße 71, 6600 Reutte, Austria

To achieve the goals of the Paris Agreement and limit global warming below 2 K compared to pre-industrial ... 扩展阅读

Modeling of the Ladle Furnace Preheating with a Graphite Heating Rod

Sergey Semenov¹, Patrick Namy¹, Magnus Sievers², Bernd Friedrich², Veronika Djupvik³, Kjell Blandhol³
¹SIMTEC, Grenoble, France
²IME Process Metallurgy and Metal Recycling, RWTH Aachen University, Aachen, Germany
³Elkem Technology, Kristiansand, Norway

This work, which is done in the framework of the SisAl Pilot EU project, presents the use of the COMSOL ... 扩展阅读

Top-blown rotary converter preheating and charge heating with an oxy-fuel burner

Sergey Semenov¹, Patrick Namy¹, Aditya Kale², Sello Tsebe²
¹SIMTEC, Grenoble, France
²MINTEK, Randburg, South Africa

Present work is done in the framework of the SisAl Pilot EU project, which aims at optimising the silicon ... 扩展阅读

Simulation-Based Sensitivity Analysis of the Direct Ammonia Fuel Cell Operating Conditions

Erno Kemppainen¹, Rutger Schlatmann¹, Sonya Calnan¹
¹Helmholtz-Zentrum Berlin, Berlin, Germany

Ammonia is studied both as a hydrogen carrier and as a fuel for renewable energy infrastructure. An important ... 扩展阅读

Geologic Carbon Storage: Implications of Two-Phase Flow on Injection-Induced Stress on Faults

S. Prasun [1], S. Kim [2], S. A. Hosseini [3],
[1] Louisiana State University, Baton Rouge, LA, USA
[2] Department of Civil Engineering University of Nebraska - Lincoln, Omaha, NE, USA
[3] Bureau of Economic Geology, University of Texas - Austin, Austin, TX, USA

Geologic carbon storage that involves injecting carbon dioxide (CO2) into a subsurface sequestration site ... 扩展阅读

Simulation of Adsorption Mechanisms of Methane and Carbon Dioxide in Shale Matrix

J. G. Moreira [1], A. L. Manriquez [1],
[1] Texas A&M University - Kingsville, Kingsville, TX, USA

The aim of this research is to contribute with the development of Carbon Capture and Storage techniques by ... 扩展阅读

Modeling of an Ensemble Averaged Electric Arc in a Laboratory-Scale Electric Arc Furnace

Sergey Semenov¹, Patrick Namy¹, Magnus Sievers², Bernd Friedrich²
¹SIMTEC, Grenoble, France
²IME Process Metallurgy and Metal Recycling, RWTH Aachen University, Aachen, Germany

This work, which is done in the framework of the SisAl Pilot EU project, presents the use of the COMSOL ... 扩展阅读

第一页

51–60 of 310

最后一页