了解多物理场仿真在基础研究和产品设计中的应用
各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。
使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。
查看 COMSOL 用户年会 2024 论文
A solid oxide fuel cell (SOFC) is composed of four layers (anode, electrolyte compatibility layer and ... 扩展阅读
An incremental wear model has been developed using COMSOL Multiphysics® with MATLAB® to predict the evolution ... 扩展阅读
Woven composites with basalt reinforcement plain 1x1 are examined to define structural mechanics. Woven ... 扩展阅读
The simulation of the piezoelectric actuation of the micro-cantilever is presented. Lead Zirconate Titanate ... 扩展阅读
A new regulation for the safety assessment of dams has just been developed in Italy and its approval process ... 扩展阅读
A COMSOL Multiphysics® model was made to design a mechanical amplifier and radiation plate for the emission ... 扩展阅读
A first generation air foil bearing (AFB) is shown in Figure 1. AFBs induce, at higher rotating speeds, an ... 扩展阅读
For the SAFARI Imaging Spectrometer, part of the SPICA satellite payload, a Calibration Source is under ... 扩展阅读
Pressure Sensors are widely used in the automotive industry. Their main use is the dynamic monitoring of ... 扩展阅读
A new design concept for large (6 mm diameter) dynamically focusing silicon membrane mirrors using ... 扩展阅读