Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat flux of a wheel break

Please login with a confirmed email address before reporting spam

Hey guys,

I am working on a project for university, and we want to do a research on how much heat is produced by breaking a bike in 6 seconds.

For this purpose we want to simulate a rotary motion. At the beging we have a velocity of v0. The breaking acceleration remains constant. Now we have the problem, that we don't know which Physics to use for this study.

Attached is a function of the angle and the anglevelocity depending on time.
The breaking pad is now producing heat through friction, which is converted in thermal energy.
It will be pleasant, if we could rotate the pad in the simulation.

I would be more than happy if I get any helps.


1 Reply Last Post 2017年1月20日 GMT-5 08:16
Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2017年1月20日 GMT-5 08:16
Hello Yannick,
Check out these links:
www.comsol.com/blogs/simulating-heating-of-brake-discs-in-a-car/
www.comsol.com/model/heat-generation-in-a-disc-brake-102
Best regards,
Jeff
Hello Yannick, Check out these links: https://www.comsol.com/blogs/simulating-heating-of-brake-discs-in-a-car/ https://www.comsol.com/model/heat-generation-in-a-disc-brake-102 Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.