Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

plane wave and scattering boundary

José María Rico García

Please login with a confirmed email address before reporting spam

Hello

I'm beginner with comsol... so maybe my question is easy...


I want generate a wave plane, my structure is a 3D cube, in the top I have a scattering boundary condition and the underside is conected with a PML structure, the others sides have PEC condition.

I choose the plane wave in scattering boundary condition, also I have choosed the polarization Exo--> 0 Eyo--> 1 and Ezo-->0
furthermore, I choose Kdirz as -1 , kdirx and Kdiry as 0...
where do I must write Ez=exp(i*ewr.k0*z)???

And HOW DO I SEE THE COMSOL INTERNAL VARIABLES??

for example ewr.k0

thanks for your attention


1 Reply Last Post 2011年8月15日 GMT-4 08:05
COMSOL Moderator

Hello José María Rico García

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年8月15日 GMT-4 08:05
You need to use "port boundary conditions" to identify wave equations.
Try doing "plasmonic wire grating" tutorial. It explains how to do it. I don't know how to find the internal variables. I was told by a friend that there was a list of variables in prev. versions (before 3.5) but I can't find it.
You need to use "port boundary conditions" to identify wave equations. Try doing "plasmonic wire grating" tutorial. It explains how to do it. I don't know how to find the internal variables. I was told by a friend that there was a list of variables in prev. versions (before 3.5) but I can't find it.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.