Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Water Table doesn't move after raining.
Posted 2011年4月12日 GMT-4 02:39 Fluid & Heat, Porous Media Flow, Results & Visualization Version 4.0a 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I am doing 2D modeling for the effect of contaminant infiltrating from the surface and then spreading over an around 30-m wide and 6-m depth area in a few years using COMSOL 4.0a, Earth Science Module. In my model there are 3 layers of soil and the bottom layer is a rock. So far I've coupled Richard's equation and Solute Transport equation in my model. However I got a problem; the modeling result shows that my groundwater table only fluctuates in the first 2 or 3 rainfalls; afterthat although there are significant rainfalls, the water table remains the same.
Can anyone help me?
Thank you,
Charles
I am doing 2D modeling for the effect of contaminant infiltrating from the surface and then spreading over an around 30-m wide and 6-m depth area in a few years using COMSOL 4.0a, Earth Science Module. In my model there are 3 layers of soil and the bottom layer is a rock. So far I've coupled Richard's equation and Solute Transport equation in my model. However I got a problem; the modeling result shows that my groundwater table only fluctuates in the first 2 or 3 rainfalls; afterthat although there are significant rainfalls, the water table remains the same.
Can anyone help me?
Thank you,
Charles
1 Reply Last Post 2011年4月16日 GMT-4 12:03
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Can anyone help me? I've still got stuck and can't proceed further with my model :(