Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

AC/DC Modelling: Problems with the exact differentiation of the different boundary conditions

Posted 2011年7月22日 GMT-4 09:26 Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 3.5a 1 Reply

Ari Berzenjie
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I'm working with simple Electrostatic Models (2D)at the Moment, and I'm having Problems to recognize the exact definition of the different boundary conditions such as: floating Potential, Axial Symmetrie, Continuity, Distributed capacitance, distributed Capacity...
I'm just not quite sure about the different effects on a Electrostatic Field.
I'd be thankful for any Help.

best regards

Ari Berzenjie
1 Reply Last Post 2011年7月27日 GMT-4 08:47
Staika Simo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年7月27日 GMT-4 08:47
Hello,

i have the same problem. please of Answer

I'd be thankful for any Help.

best regards
Chafii
Hello, i have the same problem. please of Answer I'd be thankful for any Help. best regards Chafii

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content