Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Resolution of Comsol Simulations
Posted 2012年1月6日 GMT-5 02:56 Structural Mechanics Version 3.5a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am just wondering what is the minimum resolvable changes in result that we can correctly detect in Comsol.
I would like to change some of the conditions, and study their effect on resonance frequency of cantilever. However, I don't know how to validate the results.
At some conditions, I expect very small change (e.g. 0.001% of the eigenfrequency) in some conditions. I am mainly concerned whether this much resolution is achievable or not.
I appreciate any thoughts.
Thanks,
Som
I am just wondering what is the minimum resolvable changes in result that we can correctly detect in Comsol.
I would like to change some of the conditions, and study their effect on resonance frequency of cantilever. However, I don't know how to validate the results.
At some conditions, I expect very small change (e.g. 0.001% of the eigenfrequency) in some conditions. I am mainly concerned whether this much resolution is achievable or not.
I appreciate any thoughts.
Thanks,
Som
1 Reply Last Post 2012年1月6日 GMT-5 06:26
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
you have the numerical resolution of binary number "eps" (try to look at its value in the Parameter section with a
myvar = eps
But that is seldom the limiting one for a full model, mostly it is mesh density related (and shape function value) and then most important: Solver Relative & Absolute Tolerances (both might not apply for all solvers)
My way is to double the mesh and look at the effect, this gives a good first order indication
--
Good luck
Ivar
you have the numerical resolution of binary number "eps" (try to look at its value in the Parameter section with a
myvar = eps
But that is seldom the limiting one for a full model, mostly it is mesh density related (and shape function value) and then most important: Solver Relative & Absolute Tolerances (both might not apply for all solvers)
My way is to double the mesh and look at the effect, this gives a good first order indication
--
Good luck
Ivar