Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Which model should i choose for Fluid-Thermal Incompressible Flow modelling??

Please login with a confirmed email address before reporting spam

Which model should i choose for Fluid-Thermal Incompressible Flow modelling after defining the geometry??

1 Reply Last Post 2012年3月12日 GMT-4 02:35
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年3月12日 GMT-4 02:35
Hi

have you checked NITF, in "fluid" settings ?

--
Good luck
Ivar
Hi have you checked NITF, in "fluid" settings ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.