Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulation problems concerning Invisibility Cloak

Please login with a confirmed email address before reporting spam

Hi, i have a simple question regarding the components in the elasticity matrix D in solid mecanics module. Is there any way to define different components for positions 1212 & 2121 in the matrix or is it only possible in the PDE module? If not is there any way of extending the matrix from a 6x6 to a 9x9 matrix?

1 Reply Last Post 2014年1月20日 GMT-5 03:22
COMSOL Moderator

Hello Senad Razanica

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.


Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年1月20日 GMT-5 03:22
hi,
To enter the parameters for the invisibility cloak in mechanics (with Comsol) I would rather try the non-symmetric formulation.
You can enter directly the weak form if you display the "advanced options" in the SM module.
Regards
Muamer

hi, To enter the parameters for the invisibility cloak in mechanics (with Comsol) I would rather try the non-symmetric formulation. You can enter directly the weak form if you display the "advanced options" in the SM module. Regards Muamer

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.