Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Compiling equations taking long (particle tracing)
Posted 2012年5月7日 GMT-4 10:14 Version 4.2a 3 Replies
Please login with a confirmed email address before reporting spam
- Study 1: stationary solver for a flow problem
- Study 2: time-dependent particle tracing, based on the stationary velocity field solution from study 1. (Only the particle trajectories are solved for in this step)
Depending on how I choose the time steps for the particle tracing, COMSOL seems to get stuck 'Compiling equations'.
For instance, if I choose the time steps to be
range(0,1e-3,1)
everything runs fine, but if I choose
range(0,1e-3,10)
and click compute for Study 2, the progress window shows 'Compiling equations' and immediately jumps to 100%, but it gets stuck there.
Does anyone have a clue what might be happening here? The two cases shouldn't make that much of a difference I'd say...
Hello Tom Wilms
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
i'll tell you the workaround if i find one.
Please login with a confirmed email address before reporting spam
you have to delete the particletracing solution in results.
if it's not working also delete the particle tracing physics and set it up new.
worked well for me.
Please login with a confirmed email address before reporting spam
I have a model with two Studies:
- Study 1: stationary solver for a flow problem
- Study 2: time-dependent particle tracing, based on the stationary velocity field solution from study 1. (Only the particle trajectories are solved for in this step)
Depending on how I choose the time steps for the particle tracing, COMSOL seems to get stuck 'Compiling equations'.
For instance, if I choose the time steps to be
range(0,1e-3,1)
everything runs fine, but if I choose
range(0,1e-3,10)
and click compute for Study 2, the progress window shows 'Compiling equations' and immediately jumps to 100%, but it gets stuck there.
Does anyone have a clue what might be happening here? The two cases shouldn't make that much of a difference I'd say...