Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Put variables to the size
Posted 2012年5月29日 GMT-4 03:20 Interfacing, Geometry Version 4.2a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I want to ask something to try to solve optimization problem(size of the shape),
For example, if there is block shape, put (Width, Depth, Height)=(5, x, 5).
And with the MATLAB or any method , I want to give function to variable like 'linspace'.
It always makes errors, so, I want to check it is possible.
If it is impossible, do you have any idea to solve my problem??
Thanks,
Jinhoon Wang
I want to ask something to try to solve optimization problem(size of the shape),
For example, if there is block shape, put (Width, Depth, Height)=(5, x, 5).
And with the MATLAB or any method , I want to give function to variable like 'linspace'.
It always makes errors, so, I want to check it is possible.
If it is impossible, do you have any idea to solve my problem??
Thanks,
Jinhoon Wang
1 Reply Last Post 2012年5月29日 GMT-4 04:19
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
first you should not use one letter names for "user" varibles, x.y.z and most others are already used by COMSOL
Then for geometries, currently you acn only define PARAMETERS and use these. A pARAMETER can be changed by a pstudy Parametric SWEEP condition (and only this node will remake your geometry)
--
Good luck
Ivar
first you should not use one letter names for "user" varibles, x.y.z and most others are already used by COMSOL
Then for geometries, currently you acn only define PARAMETERS and use these. A pARAMETER can be changed by a pstudy Parametric SWEEP condition (and only this node will remake your geometry)
--
Good luck
Ivar