Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL mesh to OpenFOAM

Posted 2021年12月22日 GMT+8 03:12 Fluid & Heat, Computational Fluid Dynamics (CFD), Mesh Version 5.6 2 Replies

Advitya Patyal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Looking to benchmark and test few cases in openfoam. Curious if anyone has an efficient way to transfer the mesh from COMSOL to OpenFOAM

2 Replies Last Post 2022年1月4日 GMT+8 05:43
Frank van Gool
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2021年12月23日 GMT+8 00:06

Interested in this as well and I have found this: https://www.cfd-online.com/Forums/openfoam-meshing/75056-comsol-mesh-openfoam-4.html

Let me know if this works for you (and then I can try it as well)

Interested in this as well and I have found this: https://www.cfd-online.com/Forums/openfoam-meshing/75056-comsol-mesh-openfoam-4.html Let me know if this works for you (and then I can try it as well)
Advitya Patyal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago 2022年1月4日 GMT+8 05:43

Thanks Frank, I'll give it a shot and update this post.

Thanks Frank, I'll give it a shot and update this post.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content