Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How I can export the value (for exemple a Force) of a element and not of a point?
Posted 2012年8月3日 GMT-4 10:26 Low-Frequency Electromagnetics Version 4.2a, Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
I should export the Lorentz's forces, after a EM analysis. My interest is to have the value of the force for each element and not for each node or mesh point. Comsol must have the value of each element because for compute the value in each node or mesh point, it compute this with the value of the element and the shapes fonctions of element.
1 Reply Last Post 2012年8月3日 GMT-4 18:24
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
the COMSOL way is to give neither node nor element values but the domain or boundary field values, from the discretized dependent values solved. What more do you need, you can use a cut line/surface if you want a value anywhere within the geoemtry, or you can add some internal boundaries to export over
--
Good luck
Ivar
the COMSOL way is to give neither node nor element values but the domain or boundary field values, from the discretized dependent values solved. What more do you need, you can use a cut line/surface if you want a value anywhere within the geoemtry, or you can add some internal boundaries to export over
--
Good luck
Ivar