Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Formation Compressibility from Young's Modulus and Poisson's Ratio

Posted 2022年10月19日 GMT-4 22:01 Porous Media Flow, Structural Mechanics, Physics Interfaces Version 6.0 2 Replies

Megan Ward-Baranyay
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am am working on a poroelastic model that couples Solid Mechanics and Darrcy's Law interfaces. Since formation compressibility is a function of Young's Modulus and Poisson's Ratio, does my model account for formation compressibility if I have input the values of Young's Modulus and Poisson's Ratio?

2 Replies Last Post 2022年10月20日 GMT-4 16:04
Ed Gonzalez COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2022年10月20日 GMT-4 10:48

Hi Megan, the dried bulk modulus, K_dry, is taken from the Linear Elastic material node. If you enter the pair (E,nu), it is computed as described in the documentation https://doc.comsol.com/6.0/doc/com.comsol.help.comsol/comsol_ref_structuralmechanics.27.06.html#2330360

then, the formation compressibility is derived from Biot-Willis coefficient, alpha_B, as

C_f = alpha_B / (porosity * K_dry)

if you have data for the formation compressibility, enter the Biot-Willis coefficient as

alpha_B = C_f * porosity * K_dry

Cheers Ed

Hi Megan, the dried bulk modulus, K_dry, is taken from the Linear Elastic material node. If you enter the pair (E,nu), it is computed as described in the documentation https://doc.comsol.com/6.0/doc/com.comsol.help.comsol/comsol_ref_structuralmechanics.27.06.html#2330360 then, the formation compressibility is derived from Biot-Willis coefficient, alpha_B, as C_f = alpha_B / (porosity * K_dry) if you have data for the formation compressibility, enter the Biot-Willis coefficient as alpha_B = C_f * porosity * K_dry Cheers Ed
Megan Ward-Baranyay
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago 2022年10月20日 GMT-4 16:04

Thank you very much for your help, Ed! E, nu, porosity, and alpha_B are all applied to the materials in my model, so I should be set then. Thank you for linking the documentation reference!

Best.

Megan

Thank you very much for your help, Ed! E, nu, porosity, and alpha_B are all applied to the materials in my model, so I should be set then. Thank you for linking the documentation reference! Best. Megan

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content