Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

RF module and Electric Circuit

Posted 2012年9月17日 GMT-4 13:28 Low-Frequency Electromagnetics, RF & Microwave Engineering Version 4.3 2 Replies

Joshua Einstein
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I was wondering if anyone has had any luck using the RF module along with the electric circuit module? Trying to model a dipole with a diode between leg, with an induced voltage across the terminals. It looks like this should require 3 physics (Electric Circuit, Electric Currents, and RF), but I'm not seeming to get any sort of incident field.

Any ideas or tutorials that could help would be of great assistance.
2 Replies Last Post 2013年7月8日 GMT-4 11:26
COMSOL Moderator

Hello Joshua Einstein

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Md. Nahid Hossain
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年7月8日 GMT-4 11:09
Did you solve your problem?
Did you solve your problem?
Joshua Einstein
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年7月8日 GMT-4 11:26
Unfortunately, no. By the time I was working on the project again, our trial had expired. Hopefully no one else is running into similar situations though.

I was probably just missing a boundary condition. I hope.
Unfortunately, no. By the time I was working on the project again, our trial had expired. Hopefully no one else is running into similar situations though. I was probably just missing a boundary condition. I hope.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content