Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Problem defining anisotropic material (CFRP)
Posted 2012年9月26日 GMT-4 08:51 Geometry, Materials, Structural Mechanics Version 4.2a, Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
My geometry is defined in two workplanes and one of them is rotated to the other. The material I want to simulate is carbon fiber reinforced plastic, thus an anisotropic material and it should defined on the geometry depending the coordinate system. Because of the angle between the two workplanes one should have a rotated coordinate system too. Also when defining an anisotropic material comsol puts in automatically the youngs modulus which I don't need when I can define the whole elasticity matrix.
So my Problem is to define a rotated coordinate system in the rotated workplane and how to enter an anisotropic material correctly regarding the right coordinate system. (For a plane structure it is easy to define the material with the ABD or anisotropic elasticity matrix.) Is there somebody with experience in defining fiber reinforced plastics in comsol?
I am grateful for any help!
Regards
Hello Peter Reichert
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Have you been able to fix your problem? I am stuck with the same issue and try to find my way out.
--
Shawn