Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
structure borne simulation / transfer function
Posted 2012年10月15日 GMT-4 05:05 Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi all,
I'm still new in the field of FEM simulation and dealing with Comsol Multiphysics. First, my problem: I am searching for the transfer function of structure-borne in various materials. This, I do an impact hammer test impact and measure the input and output signals (vibrations perpendicular to the surface). In the simulation, I would now like to simulate an impact of the hammer and the expansion of the structure born sound. The vibration perpendiculars to the surface at some point are also to be simulated. Based on the impact energy and the vibration at the excitation point and the measured vibration at the remote point, I would like to determine the transfer function.
How do I choose a suitable approach in Comsol?
How do I simulate an impact? Can I just choose a mass element with a predefined speed?
How can I output the vibration perpendicular to the surface?
The geometry I have already created.
For tips and ideas, I would be very grateful!
Matthias Becker
I'm still new in the field of FEM simulation and dealing with Comsol Multiphysics. First, my problem: I am searching for the transfer function of structure-borne in various materials. This, I do an impact hammer test impact and measure the input and output signals (vibrations perpendicular to the surface). In the simulation, I would now like to simulate an impact of the hammer and the expansion of the structure born sound. The vibration perpendiculars to the surface at some point are also to be simulated. Based on the impact energy and the vibration at the excitation point and the measured vibration at the remote point, I would like to determine the transfer function.
How do I choose a suitable approach in Comsol?
How do I simulate an impact? Can I just choose a mass element with a predefined speed?
How can I output the vibration perpendicular to the surface?
The geometry I have already created.
For tips and ideas, I would be very grateful!
Matthias Becker
1 Reply Last Post 2012年10月15日 GMT-4 05:51
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
that is a delicate issue, as you need to define up to which frequency you want to study the effects. Impact is in theory an instantaneous effect, butwith FEM you need to make it continuous, even if "short". I use oftena gaussian impulse, but this also defines a filter function on the modes you excite. >Therefore, I then use time modal developmnents with a limited number of modes, this is becoming more and more usefriendly in the latest versions, but I expect still a few uppgrades, such that one can more easily extract a transfer function / state space matrix of a REDUCED model with if possible non contiguous modes selected by the user, based on i.e. modal mass values
--
Good luck
Ivar
that is a delicate issue, as you need to define up to which frequency you want to study the effects. Impact is in theory an instantaneous effect, butwith FEM you need to make it continuous, even if "short". I use oftena gaussian impulse, but this also defines a filter function on the modes you excite. >Therefore, I then use time modal developmnents with a limited number of modes, this is becoming more and more usefriendly in the latest versions, but I expect still a few uppgrades, such that one can more easily extract a transfer function / state space matrix of a REDUCED model with if possible non contiguous modes selected by the user, based on i.e. modal mass values
--
Good luck
Ivar