Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
2D Sim to 3D circular
Posted 2010年2月15日 GMT-5 03:53 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
in the subdomain settings of a 2D simulation it is possible
to enter the parameter thickness. However, this leads always
to a quadratic structure.
Is it possible to enter a configuration that the 2D structure
is a crossection of a circular problem (e.g. circular membrane
with emes to calculate the capacitive matrix depending
on load pressure)?
Greetings
Stefan
in the subdomain settings of a 2D simulation it is possible
to enter the parameter thickness. However, this leads always
to a quadratic structure.
Is it possible to enter a configuration that the 2D structure
is a crossection of a circular problem (e.g. circular membrane
with emes to calculate the capacitive matrix depending
on load pressure)?
Greetings
Stefan
1 Reply Last Post 2010年2月16日 GMT-5 02:12
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
I call that a 2D axisymmetric problem and you have the specific application domain defined, with the axis at the origine and coordinates r z. Now do not forget to multiply correctly by 2*pi when required (or select the correspondant ticks)
standard 2D is in fact 3D with a default depth of 1[m], and the formulas simplified accordingly, nothing else
but I agree it appears "square" ,compared to 2D-axi
Good uck
Ivar
I call that a 2D axisymmetric problem and you have the specific application domain defined, with the axis at the origine and coordinates r z. Now do not forget to multiply correctly by 2*pi when required (or select the correspondant ticks)
standard 2D is in fact 3D with a default depth of 1[m], and the formulas simplified accordingly, nothing else
but I agree it appears "square" ,compared to 2D-axi
Good uck
Ivar