Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Port Direction Error

Posted 2023年8月22日 GMT-4 03:54 Electromagnetics, Wave Optics, General, Geometry, Results & Visualization, Studies & Solvers, Physics Interfaces 1 Reply

Till Degenhardt
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Good morning, I have a problem with the waveoptics-module in Comsol Multiphysics.

I'm trying to model a simple Waveguide. Previous attempts were in 3D and succeeded, but when I tried to simulate the waveguide in 2D, the Ports suddenly looked like this:

When I separate the two parts of the guide, the port works as it should:

This happened in none of the previous simulations. I reproduced every setting of the port from the other models, but one of the portboundarys always flows in the wrong direction. Dies anyone know how this could be solved? Sincerely, Till Degenhardt

1 Reply Last Post 2023年8月22日 GMT-4 04:43
Acculution ApS Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 year ago 2023年8月22日 GMT-4 04:43

Try this on that boundary and see what happens: https://doc.comsol.com/5.5/doc/com.comsol.help.comsol/comsol_ref_definitions.12.086.html

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Try this on that boundary and see what happens: https://doc.comsol.com/5.5/doc/com.comsol.help.comsol/comsol_ref_definitions.12.086.html

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content