Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Simulating elastic contact

Posted 2024年3月18日 GMT-4 03:50 2 Replies

Gabriele Laita
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello everyone,

I am trying to simulate an elastic contact with COMSOL Multiphysics, but on the internet I can only find tutorials on how to simulate a contact through the definition of contact pairs, which automatically adds the non linearity to the study (thus enhancing a lot the computational time).

Am I missing something or comsol does not provide such simulations?

Thanks,

Gabriele

2 Replies Last Post 2024年3月20日 GMT-4 10:29
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 8 months ago 2024年3月20日 GMT-4 05:07

Can you explain what you mean by 'elastic contact'? Contact is an inherently nonlinear phenomenon, so it cannot be studied using a linear method.

-------------------
Henrik Sönnerlind
COMSOL
Can you explain what you mean by 'elastic contact'? Contact is an inherently nonlinear phenomenon, so it cannot be studied using a linear method.
Gabriele Laita
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 months ago 2024年3月20日 GMT-4 10:29
Updated: 8 months ago 2024年3月20日 GMT-4 10:31

Can you explain what you mean by 'elastic contact'? Contact is an inherently nonlinear phenomenon, so it cannot be studied using a linear method.

Given the inherent non-linearity of the problem, I realize there may not be a straightforward solution to address my initial inquiries. Consequently, I'm reframing the question.

Here's a basic example I'm attempting to replicate. The aim is to simulate the outcome when a sudden shock causes a gyro to collide with its stoppers. I've configured the simulation accordingly, but I've noticed an unrealistic behavior: following the collision, the reaction force is so strong that the gyro begins moving in the opposite direction to the initial force, resulting in a back-and-forth oscillation.

The primary issues with this simulation (called in the file "Time dependent, collision") pertain to the unrealistic behavior observed and the excessive duration of the simulation, which extends to hours even in this highly simplified scenario.

Could you assist me in identifying any potential flaws in my simulation implementation?

Thank you, Gabriele

>Can you explain what you mean by 'elastic contact'? Contact is an inherently nonlinear phenomenon, so it cannot be studied using a linear method. Given the inherent non-linearity of the problem, I realize there may not be a straightforward solution to address my initial inquiries. Consequently, I'm reframing the question. Here's a basic example I'm attempting to replicate. The aim is to simulate the outcome when a sudden shock causes a gyro to collide with its stoppers. I've configured the simulation accordingly, but I've noticed an unrealistic behavior: following the collision, the reaction force is so strong that the gyro begins moving in the opposite direction to the initial force, resulting in a back-and-forth oscillation. The primary issues with this simulation (called in the file "Time dependent, collision") pertain to the unrealistic behavior observed and the excessive duration of the simulation, which extends to hours even in this highly simplified scenario. Could you assist me in identifying any potential flaws in my simulation implementation? Thank you, Gabriele

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content