Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
triple point heat transfer gas, liquid, solid
Posted 2013年2月28日 GMT-5 04:18 Heat Transfer & Phase Change Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I want to know if it possible (or if it exists some tips) for modeling a triple point where gas, solid and liquid are in contact each over. At this point I have a huge loss of heat by conduction and I would to measure it and compare with experiment (and with over simulations where analytic functions describe the heat transfer coefficient near the triple point).
I try to reduce at maximum mesh size near this point, i have some issue with convergence when i decrease the parameter giving me the temperature width of the phase transition of my material. (Cp variation)
Some ideas?
Thank you
I want to know if it possible (or if it exists some tips) for modeling a triple point where gas, solid and liquid are in contact each over. At this point I have a huge loss of heat by conduction and I would to measure it and compare with experiment (and with over simulations where analytic functions describe the heat transfer coefficient near the triple point).
I try to reduce at maximum mesh size near this point, i have some issue with convergence when i decrease the parameter giving me the temperature width of the phase transition of my material. (Cp variation)
Some ideas?
Thank you
1 Reply Last Post 2013年2月28日 GMT-5 04:38
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
I know that i can increase a little the surface contact but someone have an other idea?