Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how can I use plasticity model in the poroelasticity module

Please login with a confirmed email address before reporting spam

I want to use soil plasticity model in the poroelasticity module? How can I add soil plasticity model into the poroelasticity module? I notice I can add soil plasticity model in the structural mechanics module, but I can not find soil plasticity model in the poroelasticity module.
Thanks

1 Reply Last Post 2013年4月14日 GMT-4 07:23

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年4月14日 GMT-4 07:23
I do not have geomechanics module to comment.

But I would be surprised if soil plasticity model do not have provision for inputs concerning flow. Is it possible that you do not have subsurface module due to which you cannot access poroelastic model? If you cannot provide flow parameters and you do not have poroelastic model, then you can easily build your own flow model, presumably Darcy's via PDE interface.


Suresh
I do not have geomechanics module to comment. But I would be surprised if soil plasticity model do not have provision for inputs concerning flow. Is it possible that you do not have subsurface module due to which you cannot access poroelastic model? If you cannot provide flow parameters and you do not have poroelastic model, then you can easily build your own flow model, presumably Darcy's via PDE interface. Suresh

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.