Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Frequency study not converging
Posted 2026年1月12日 GMT+8 02:06 1 Reply
Please login with a confirmed email address before reporting spam
These two files have been uploaded, one is the planar layer only and other is planar with a dielectric layer.
The coil geometry analysis + stationary study works fine in both the cases, but while doing freq study with freq sweep as 0.1,0.5,1,10,25,50,75,100 KHz , the one with dielectric is not converging as the error is not going 0.
Is there any prob with the geometry pr some issue with the study.
Attachments:
Please login with a confirmed email address before reporting spam
Anushka,
the mesh in the dielectric isn't looking good. You may want to refine that. There is no study definition in your file.
Cheers Edgar
-------------------Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
