Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol and I'm trying to model a 3-coil transformer

Posted 2013年11月29日 GMT-5 06:32 Version 4.3b 0 Replies

Gaurav Srivastava
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all, I am new in Comsol and I'm trying to model a 3-coil transformer consisting of primary coil, Secondary coil, tertiary coil . Basically, there will be a voltage source supplied to the primary coil . Secondary coil and tertiary coil which is placed beside it. will pick up the magnetic field produced by the primary coil and thus current will be induced in the secondary coil. but tertiary coil are not magnetic exited with primary coil .
What I have done so far is, I use AC/DC module where I set multi-turn domain to all the coils and I excite the coil with circuit. There is a AC voltage source connected to the primary coil . But I do not see any change voltage /current (zero) in tertiary coil.
plz help me....
thanku
0 Replies Last Post 2013年11月29日 GMT-5 06:32
COMSOL Moderator

Hello Gaurav Srivastava

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content