Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

cross-section averaged fluid velocity as a function of flow direction in a rectangular pipe

Posted 2014年5月15日 GMT-4 13:22 Fluid & Heat, Results & Visualization Version 4.4 1 Reply

Panagiotis Giotakos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi to all,

I am trying to use general projection in a simple rectangular pipe, with laminar flow of water in order to plot the average velocity,(spf.U), (average in a yz cross-section) across the length of the pipe (x).

Thank you in advance for your help
1 Reply Last Post 2014年5月15日 GMT-4 13:25
Panagiotis Giotakos
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年5月15日 GMT-4 13:25

Hi to all,

I am trying to use general projection in a simple rectangular pipe, with laminar flow of water in order to plot the average velocity,(spf.U), (average in a yz cross-section) across the length of the pipe (x).

Thank you in advance for your help


The Geometry is 3D
I am able to do it in 2D geometry with the linear projection but not in 3D
[QUOTE] Hi to all, I am trying to use general projection in a simple rectangular pipe, with laminar flow of water in order to plot the average velocity,(spf.U), (average in a yz cross-section) across the length of the pipe (x). Thank you in advance for your help [/QUOTE] The Geometry is 3D I am able to do it in 2D geometry with the linear projection but not in 3D

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content