Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

how can apply AC voltage to model

Posted 2014年8月11日 GMT-4 13:24 Low-Frequency Electromagnetics Version 3.5a 1 Reply

Amir Bayat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi
I want to simulte syrvey appling a AC voltage to a electrode and it's inducing on another electrode and measurment of this voltages.
I don't know that how i can apply this AC voltage to first electrode(R3).
please help me.
my model is attached.
regards

Attachments:

1 Reply Last Post 2014年8月14日 GMT-4 03:31
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年8月14日 GMT-4 03:31
That is because you are using 'electrostatics' physics. In electrostatics there are (practically) no moving charges, so AC is impossible. You will need a different physics.
That is because you are using 'electrostatics' physics. In electrostatics there are (practically) no moving charges, so AC is impossible. You will need a different physics.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content