Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
need a crop tool, or some other means of confining simulation volume
Posted 2014年11月27日 GMT-5 06:05 Geometry 1 Reply
Please login with a confirmed email address before reporting spam
I'm fairly new to Comsol.
I have a rather complicated geometry involving various interfaces which I use for wave optics.
In order to test simulation on a smaller scale, I would like to simulate only part of the structure. For this a geometry "crop tool" would be nice, i.e. something like the partition tool which cuts geometry along its tool's boundaries - but will remove all elements outside the boundaries.
Is there something available, or can be created with a few basic operations ?
I have a rather complicated geometry involving various interfaces which I use for wave optics.
In order to test simulation on a smaller scale, I would like to simulate only part of the structure. For this a geometry "crop tool" would be nice, i.e. something like the partition tool which cuts geometry along its tool's boundaries - but will remove all elements outside the boundaries.
Is there something available, or can be created with a few basic operations ?
1 Reply Last Post 2014年12月1日 GMT-5 06:29
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
Dear Sebastian,
You can try to partition / crop your geometry with Boolean operations in COMSOL.
You can try to simplify the geometry in your CAD tool if it was initially created there and imported into COMSOL.
You can create a new simplified geometry with COMSOL from scratch.
For more detailed help feel free to contact us via Support: www.comsol.com/support.
You can attach your model if you wish such that we can focus on your specific task.
All the best,
Zoran
You can try to partition / crop your geometry with Boolean operations in COMSOL.
You can try to simplify the geometry in your CAD tool if it was initially created there and imported into COMSOL.
You can create a new simplified geometry with COMSOL from scratch.
For more detailed help feel free to contact us via Support: www.comsol.com/support.
You can attach your model if you wish such that we can focus on your specific task.
All the best,
Zoran