案例集锦

COMSOL Multiphysics 案例库模型来自广泛的应用领域,包括电气、机械、流体和化工等行业。您可以下载现成即可使用的模型,以及详细的建模步骤说明,作为您建模工作的起点。请使用“快速搜索”查找与您的专业领域相关的模型,并登录或创建一个与有效的 COMSOL 许可证相关联的 COMSOL Access 帐户,下载模型文件。

Magnetic Damping of Vibrating Conducting Solids

When a conductive solid material moves through a static magnetic field, an eddy current is induced. The current that flows through the conductor, which is itself moving through the magnetic field, induces a Lorentz force back on the solid. Therefore, a conductive solid that is vibrating in a static magnetic field will experience a structural damping. In this example, a cantilever beam is ...

Linear Magnetostrictive Transducer

This tutorial shows a 3D model of a magnetostrictive transducer. The magnetostrictive core is made of Terfenol-D. The material behavior is assumed to be linear but magnetomechanically coupled. The core is surrounded by a coil. The transducer housing is made of a ferromagnetic material. The model is solved on a one-quarter symmetric geometry. The static model is solved for different values of ...

Geoelectrics - Forward Problem and Sensitivity

The classical forward problem of geoelectrics (includes electrical resistivity tomography, ERT and earlier techniques as vertical electric sounding, VES) is the calculation of potentials at a given set of electrodes (M,N) while current is injected at other electrodes (A,B) into the ground. Typically the physical domain (earth) is unbounded to the sides and the bottom because of which one needs ...

Focusing Ions with a Quadrupole Lens

Just like optical lenses focus light, electric and magnetic lenses can focus beams of charged particles. Systems of magnetic quadrupole lenses find a common use in focusing both ion and particle beams in accelerators at nuclear and particle physics centers. This model shows the path of ions going through three consecutive magnetic quadrupole lenses. The model also takes fringing fields ...

Magnetic Prospecting of Iron Ore Deposits

Estimating center-of-mass coordinates and the spatial extent of iron-rich layers helps decrease the cost of exploration. Magnetic prospecting is applicable for doing this for certain types of iron ore deposits. Passive magnetic prospecting relies on accurate mapping of local geomagnetic anomalies – deviations from the natural magnetostatic fields based on the magnetic dipole of the Earth. ...

Iron Sphere in a 60 Hz Magnetic Field

An iron sphere is exposed to a spatially uniform, sinusoidally time-varying, background magnetic field. The frequency of the field is low enough such that the skin depth is larger than the radius of the sphere. A reduced field formulation is used to impose the background field. Two approaches for solving this problem are shown. The induced currents in the sphere and the perturbation to the ...

Capacitance in a Microstrip

To illustrate how to calculate lumped parameters of capacitance, this model calculates such in a microstrip. The example shows the two different ways of calculating this: with a static analysis and with a time-harmonic analysis.

Nonlinear Magnetostrictive Actuator and Sensor

Magnetostrictive material exhibits free strain under the influence of magnetic field. It also exhibits a stress-induced change in magnetization in the presence of a bias magnetic field. In this tutorial we model a quasi-static transducer which has a steel housing enclosing a drive coil. A magnetostrictive material is placed in the core. Magnetic and structural interactions between the ...

Thin Low Permittivity Gap Comparison

The thin low permittivity gap boundary condition is meant to approximate a thin layer of material with low relative permittivity compared to its surroundings. This boundary condition is available for electrostatic field modeling. This example compares the thin low permittivity gap boundary condition to a full-fidelity model and discusses the range of applicability of this boundary condition.

Capacitive Micromotor

This tutorial shows how to model a 2D capacitive micromotor. The motor consists of a rotor and a stator made of polysilicon. The cogs of the stator are subjected to a time-varying pulsed voltage such that the voltage on adjacent cogs vary by a phase difference of 2p/3. As a result, a time-varying torque acts on the rotor thereby rotating it about its center. This model shows how to use an ...

Quick Search