C. Grau Turuelo, B. Bergmann, C. Breitkopf, F. Hoffmann, L. Brencher
Technische Universität Dresden, Dresden, Saxony, Germany
Infineon Technologies GmbH, Dresden, Dresden, Saxony, Germany
A novel technique for semiconductor manufacturing is introduced: Silicon-On-Nothing. This process consists of an initial cylindrical trench which has a ...
D. Rizzello, P. Canepa, E. Armadillo
DISTAV - University of Genova, Genova, Italy
Topographic effects on magnetotelluric responses may be severe on rugged terrains. Finite elements simulation is a valuable tool to quantify this ...
C. Del Vecchio, G. Agapito, L. Carbonaro, F. Marignetti, E. De Santis, Y. Coia
National Institute for Astrophysics, Arcetri Astrophysical Observatory, Firenze, Italy
University of Cassino and Southern Latium, Cassino, Italy
VRALA is the ideal candidate as an Adaptive Optics actuator at visible wavelengths. Its electric characteristics variations, suitable current commands, ...
Cheng-Che (Jerry) Hsu
Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan
Multiphysics simulation was used in this work to model inductively coupled plasmas (ICPs). Developing a model of an ICP is challenging due to the ...
Renewable Energy RD Center, Chung-Hsin Electric & Machinery, Taiwan
Proton exchange membrane fuel cells (PEMFCs) were investigated using COMSOL Multiphysics with the AC/DC Module and Chemical Engineering Module. ...
H. Fuqua, G. Delory, I. de Pater, R. Grimm
University of California - Berkeley, Space Sciences Lab, Berkeley, CA, USA
University of California - Berkeley, Berkeley, CA, USA
Southwest Research Institute, Boulder, CO, USA
Electromagnetic sounding measurements utilize magnetic induction to constrain the interior geophysical properties of planetary bodies. Under some ...
Design of a MEMS Resonator for a Centre Frequency Greater than 26.35 MHz and Temperature Coefficient Frequency Less than 0.5 ppm
S.Manikandan, R.Radeep krishna
Kalasalingam University, Department of ECE, Srivilliputtur ,Krishnan koil, Tamil Nadu, India
The variability of the design parameters caused by material properties like thermal conductivity is the major challenge in Micro Electromechanical ...
Analysis of Heat Transfer in a Complex Three Dimensional Structure Fabricated by Additive Manufacturing - new
C. Settle, K. Hoshino
Biomedical Engineering Department, University of Connecticut, Storrs, CT, USA
The goal of this study was to create a three dimensionally designed biomedical device with multiple functionalities and analyze its simulated heat ...
A. H. Ito, S. R. Lautenschlager, J. H. C. Reis, A. Belincanta
Universidade Estadual de Maringá, Maringá, PR, Brazil
The percolation of water into soil can be modeled considering Darcy's Law in laminar flow. In this manner the key property is the coefficient of ...
Y. Patil, S. S. Khirwadkar, S. Belsare
Institute for Plasma Research, Gandhinagar, Ahmedabad, India
Electron beam has a wide range of applications in the material processing and joining techniques. Apart from that, it has also been utilized to ...