论文和技术资料

快速搜索

技术资料

白皮书

了解多物理场仿真在基础研究和产品设计中的应用

各个行业的工程师和科研人员都在使用多物理场仿真来研发创新的产品设计和流程。他们在 COMSOL 用户年会上展示了丰富的技术论文和演示文稿，您可以从他们的研究成果中寻找灵感。

使用左侧【快速搜索】工具查找您感兴趣的研究，或按照应用领域进行筛选。

查看 COMSOL 用户年会 2025 论文

搜索：

变孔隙率热化学储能过程数值模拟

郭昊 [1], 恽迪 [1],
[1] 西安交通大学

能量存储技术是减少能量浪费和节约能源的最为有效的手段之一。热化学储能技术具备高功率、大容量和低损耗的特点，在实际应用中可近乎无损耗地进行跨季节性利用，上述优点使得热化学储能近年来吸引了国内外学者的广泛关注 ... 扩展阅读

Network-of-Zones Model for Stirred Tank with Fractal Impeller

G.M. Mule[1], A.A. Kulkarni[1]
[1]CSIR - National Chemical Laboratory, Pune, Maharashtra, India

Stirred tanks are widely used in the pharmaceuticals, chemical and paint industries for variety of ... 扩展阅读

Model Based Stimulus Experiments to Improve Biological Wastewater Treatment Performance

N. Do [1], M. Stich [1],
[1] Non-linearity and Complexity Research Group, System Analytics Research Institute, School of Engineering and Applied Science, Aston University, Birmingham, United Kingdom

The municipal wastewater treatment in a sustainable context requires a smart technology in which an optimal ... 扩展阅读

Fluid Flow Modeling in a Bioreactor Applied to Wine Production

C. Soares [1], N. Padoin [1], P. M. Aballay [2], O. A. Ortiz [2],
[1] Universidade Federal de Santa Catarina, Florianópolis, SC, Brazil
[2] Universidad Nacional de San Juan, San Juan, Argentina

Wine quality is strongly dependent on the operation parameters of the production process. In batch or fed ... 扩展阅读

Electrical Modeling of Molten Salt Electro-Refining Processes

A. OURY [1], P. Namy [1],
[1] SIMTEC, Grenoble, France

A common pyrometallurgical route for the recovery of numerous metals and rare earths is high-temperature ... 扩展阅读

基于多物理场耦合方法分析熔盐堆工况

张海黔 [1], 刘国财 [1], 王凯凯 [1],
[1] 南京航空航天大学，南京，中国

熔盐堆是唯一一种以液态为燃料的反应堆，熔盐堆研究不同于其他反应堆。本文采用多物理场耦合方法模拟熔盐堆发生工况时熔盐堆中一些参数的变化[1-4]。我们将反应堆模型简化为一个石墨围成的空腔结构，如图[1a] ... 扩展阅读

Multiphysics Based Electrical Discharge Machining Simulation

A. Mishra [1], S. Bhattacharya [1], D. Datta [1], Santosh Kr [1], G. K. Dey [1]
[1] Bhabha Atomic Research Centre, Mumbai, India

This paper presents a Non Fourier heat conduction model to analyse the heat conduction from the electrical ... 扩展阅读

Optimization of Jet Mixer Geometry and Mixing Studies

A. Egedy[1], B. Molnar[1], T. Varga[1], T. Chován[1]
[1]Department of Process Engineering, University of Pannonia, Veszprém, Hungary

The primary aim of using jet as mixer, like in case of other mixing devices, is to increase the heat and mass ... 扩展阅读

A Computational Fluid Dynamics Study of Fluid Catalytic Cracking Cyclones

J. W. McTernan[1], I. Abu-Mahfouz[2]
[1]Buell Division of Fisher-Klosterman Inc., Lebanon, PA, USA
[2]Pennsylvania State University - Harrisburg, Middletown, PA, USA

Fluidized Catalytic Cracking (FCC) regenerators utilize a fluidized bed to facilitate catalyst regeneration. ... 扩展阅读

COMSOL Multiphysics® Simulation of 3D Single-Phase Transport in a Random Packed Bed of Spheres

A. Dixon[1]
[1]Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

Packed beds are important in the chemical industries. Computational fluid dynamics (CFD) can simulate ... 扩展阅读

第一页

331–340 of 449

最后一页