Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MUMPS allocation factor increased

Please login with a confirmed email address before reporting spam

Hi,

What is this error ? how can I get rid of it ? In fact this is a warning

what does this error mean ?
"MUMPS allocation factor increased to ...."

3 Replies Last Post 2011年4月29日 GMT-4 01:40
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月21日 GMT-4 10:06
Hi

I would suggest to check if the initial conditions are not too far off, or if you have something marginally "unique" i.e. BC's almost linearly related that does not give a clear path for the solver

--
Good luck
Ivar
Hi I would suggest to check if the initial conditions are not too far off, or if you have something marginally "unique" i.e. BC's almost linearly related that does not give a clear path for the solver -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月28日 GMT-4 22:57
thanks Ivar,
what do u mean by" marginally unique"

thanks Ivar, what do u mean by" marginally unique"

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年4月29日 GMT-4 01:40
Hi

all depends on the model, most PDE has many or infinite number of valid solutions, your BCs are there to get down to ONE single one, but sometimes your BC's are not orthogonal enough.

You believe you have the right count of BC's but two are almost identical or lined up or lets say linearly related
This means that you are in fact missing one boundary condition.

Then I notice that COMSOL might have problems to identify the single solution and your results looks noisy, but if you look at the "envelope" of the solution shape you can distinguish two valid solutions, and the results are flipping between the two at i.e. each (or almost) solver step. For me an indication that I need to better define my BC's or add one more, still the question which one ;)

--
Good luck
Ivar
Hi all depends on the model, most PDE has many or infinite number of valid solutions, your BCs are there to get down to ONE single one, but sometimes your BC's are not orthogonal enough. You believe you have the right count of BC's but two are almost identical or lined up or lets say linearly related This means that you are in fact missing one boundary condition. Then I notice that COMSOL might have problems to identify the single solution and your results looks noisy, but if you look at the "envelope" of the solution shape you can distinguish two valid solutions, and the results are flipping between the two at i.e. each (or almost) solver step. For me an indication that I need to better define my BC's or add one more, still the question which one ;) -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.