Menu

Discussion Forum

New Discussion
查找

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Using a sliced 3D solution in a 2D simulation

Posted 2019年6月3日 GMT-4 07:42 Version 5.2a 0 Replies

Daniel Barna
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello, I have a model file which contains a 3D and 2D geometry. The 2D geometry was created from the 3D geometry using a cross section. I would like to use the solution of the 3D geometry, evaluated at the plane of the cross section, in the 2D simulation as a source field. Is it possible? Thank you Daniel

0 Replies Last Post 2019年6月3日 GMT-4 07:42
COMSOL Moderator

Hello Daniel Barna

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content