Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Tangential stresses
Posted 2013年1月8日 GMT-5 08:59 Modeling Tools & Definitions, Parameters, Variables, & Functions, Structural Mechanics Version 4.3a 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
how can I calculate the tangential stresses of a ring, if the model is 2D axisymmetric?
Have I choose the "Surface Integration" and multiply the total surface for my result because of the symmetry or does Comsol do it automatically?
how can I calculate the tangential stresses of a ring, if the model is 2D axisymmetric?
Have I choose the "Surface Integration" and multiply the total surface for my result because of the symmetry or does Comsol do it automatically?
1 Reply Last Post 2013年1月8日 GMT-5 10:40
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
open up all the tabs on the integration, in 2D-axi you have an option to have surface integration calculating the full volume by implicitly multiplying by 2*pi*r, but you can also do it by hand ;)
--
Good luck
Ivar
open up all the tabs on the integration, in 2D-axi you have an option to have surface integration calculating the full volume by implicitly multiplying by 2*pi*r, but you can also do it by hand ;)
--
Good luck
Ivar