Get shear wave speed in elastic module

Please login with a confirmed email address before reporting spam

Hi, recently I started to work with the Elastic Waves module. My goal is to get the shear wave speed in a gelatinous material. In the attached file I'm using a material with:

  • Density (rho) 1000 kg/m^3
  • Young's Modulus (E) 8.333 kPa
  • Poisson's ratio (nu) 0.4999

These are the equations I'm using in order to get the E for a specific cs

So, for 8.333 kPa I should get 5 m/s, but the cs plot computes 1.67 m/s for the material. Why?



1 Reply Last Post 2025年2月12日 GMT-5 07:57
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 week ago 2025年2月12日 GMT-5 07:57

I don't at all understand your math, but

-------------------
Henrik Sönnerlind
COMSOL
I don't at all understand your math, but c_s = \sqrt{\frac{G}{\rho}} = \; \{ \textrm {Incompressible}\} \; = \sqrt{\frac{E}{3\rho}} = \sqrt{\frac{8.333\cdot 10^3}{3 \cdot 1000}} = \sqrt{\frac{8.333}{3}} = 1.67

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.