Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
weak form for elasticity
Posted 2014年8月24日 GMT-4 10:28 Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
I used a weak form PDE to solve a problem a elastic body was subjected to a simple shear, at first I used the Solid Mechanics module and I solved the problem very well, then I typed the weak form PDEs and I obtained the exact the same numerical results(eg. strain and stress), however, in the weak form solution I cannot visualized see the body deformation under shear than Solid Mechanics module, I only got the Data nephogram. How to see the displacements of the elastic body? Use Views trick?
Hello Zhipeng Pi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.