Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Heat transfer module
Posted 2019年4月12日 GMT-4 10:09 Heat Transfer 0 Replies
Please login with a confirmed email address before reporting spam
Good day everyone,
I am currently working on a heat transfer problem in COMSOL. Here is my problem:
https://www.engineersedge.com/heat_transfer/conductive_heat_transfer_pipe_13841.htm
Basically, in my boundary conditions of my model I put the temperature T1 and I have a heat flux of 37 kW going out of my cylinder from T2. The goal is to calculate T2 by imposing T1 temperature and the power of 37kW.
My question is: how to put as a condition the 37 kW crossing the section T1-T2 and going out of my cylinder?
Thank you for your answer.
Kind regards,
Gauthier.
Hello Gauthier Humblet
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.