Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
coupling of solid mechanics with heat transfer (moving heat source)
Posted 2020年5月6日 GMT-4 04:01 Heat Transfer & Phase Change, Structural Mechanics 0 Replies
Please login with a confirmed email address before reporting spam
Hello every one, i'm making a model to simulate heat transfer and thermal deformations at welding with a moving heat source through coupling heat transfer and solid mechanics. when i simulate heat transfer and the moving heat soure only, the simulation runs very well but the problem is when i couple it with solid mechanics the moving heat source drifts and doesn't move in a straight forward line (welding direction). also, the moving heat source equation after simulation tells (incosistent unit)
please, can any one tell me where is the problem? what am i missing? or what shoud i do to model this situation
Hello Mohamed Omar
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.