Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Error while processing

Please login with a confirmed email address before reporting spam

Sir,

While computing the results for my model, I got an error which says

" Failed to find consistent initial values.
Segregated group 2

Out of memory during assembly.
Last time step is not converged.
- Feature : Time - Dependent solver 1 (sol1/t1)
- Error : Failed to find consistent initial values. "

Please let me know what would be the error and what are all the probable corrections to be made??

1 Reply Last Post 2013年2月9日 GMT-5 09:52
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年2月9日 GMT-5 09:52
Hi

well the default initial condition all "0" is often far from optimal, why not think a little and try to add some more realistic initial conditions, or to start with a steady state to set a good starting point.

Anyhow, check your solver sub-nodes and fint the group 2 and see which variable is giving problems to the solver, then see what you can do with the initial conditions starting with those dependent variables

--
Good luck
Ivar
Hi well the default initial condition all "0" is often far from optimal, why not think a little and try to add some more realistic initial conditions, or to start with a steady state to set a good starting point. Anyhow, check your solver sub-nodes and fint the group 2 and see which variable is giving problems to the solver, then see what you can do with the initial conditions starting with those dependent variables -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.