Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Inductive sheet impedance in transient simulation
Posted 2014年10月24日 GMT-4 13:26 RF & Microwave Engineering, Parameters, Variables, & Functions Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
I am using the transient RF module in Comsol 4.4. I want to assign a sheet impedance, Zs, on a boundary such that Etan=Zs*Js, where Etan is the tangential electric field on the boundary and Js is the surface current density on that boundary. This expression is applicable in the frequency domain. To define a capacitive surface impedance in the time domain, I assigned a surface current density of Js=Cs*d(temw.Ex,t), where Cs is the surface capacitance.
However, I am running into trouble when I try to define an inductive impedance. In this case, we need temw.Ex=Ls*dJs/dt which leads to a surface current density of Js=timeint(0,t,temw.Ex)/L. This expression is not acceptable by Comsol.
My question is: How can I define an inductive sheet impedance on a boundary?
Thank you
Hello Nikolaos Chiotellis
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
On the boundary you need to be inductive, assign a "Boundary ODEs and DAEs (bode)" with
Dependent variable quantity: Surface current density (let's call this jsurf)
Source term quantity: Electric field
In the Distributed ODE section use:
Source Term: temw.Ex (or the appropriate electric field)
Damping or Mass Coefficient: The value of sheet inductance that is needed.
Mass Coefficient: 0
Initial values:
jsurf: 0
δjsurf/δt:0
Then go in the Electromagnetic Waves, Transient (temw) and add a surface current. The appropriate current density will be the jsurf we defined above.