Quick Search

COMSOL Multiphysics 案例库模型来自广泛的应用领域,包括电气、机械、流体和化工等行业。您可以下载现成即可使用的模型,以及详细的建模步骤说明,作为您建模工作的起点。请使用“快速搜索”查找与您的专业领域相关的模型,并登录或创建一个与有效的 COMSOL 许可证相关联的 COMSOL Access 帐户,下载模型文件。

Rock Fracture Flow

A potential flow model of fluid flow in a rock fracture uses the so-called Reynolds equation. It shows how to use experimental data interpolated to a function used in the equation.

Automotive Muffler

This model simulates the pressure wave propagation in a muffler for a combustion engine. It uses a general approach for analysis of damping of the propagation of harmonic pressure waves. The model is solved in the frequency domain and provides efficient damping in a frequency range of 100-1000 Hz.

Virtual Operation on a Wheel Rim Geometry

This tutorial shows how to perform virtual geometry operations on an imported CAD geometry. These virtual operations, such as form composite entities or ignore entities can help to improve the mesh and reduce the total element number.

An Integro-Partial Differential Equation

The heat distribution in a hollow pipe, whose ends are held at two different temperatures, is studied. The outside surface is assumed to be thermally isolated and the inner surfaces have radiation boundary conditions. The role of convection in the heat transfer is taken to be negligible. The temperature is assumed to be constant along the thickness of the pipe and rotational symmetry is also ...

Tubular Reactor with Nonisothermal Cooling Jacket

The model describes a tubular reactor where propylene oxide (A) reacts with water (B) to form propylene glycol (C): A + B -> C Since water is the solvent and present in abundance, the reaction kinetics may be described as first order with respect to propylene oxide: R = k*C_A Alternatively, a second-order reaction can also be implemented according to: R = kf*C_A*C_B - kr*C_C The reaction is ...

Micromixer

The development of mixers does often not only have to account for effectiveness, but also other factors must be involved, such as cost and complexity for manufacturing. The three models study a laminar static micro mixer with two parallel sets of split-reshape-recombine mixing elements. The mixer works through lamination of the streams without any moving parts and the mixing is obtained through ...

Implementing a Point Source

This model solves the Poisson equation on a unit disk with a point source in the origin. The easiest way to describe a point source in COMSOL Multiphysics is by using an extra weak term. To obtain the weak formulation of the general Poisson equation, we multiply it with a test function u_test and integrate over the domain. The mesh density is dense, close to the origin, so as to resolve the ...

Stresses in a Pulley

The stresses in a pulley connected to an engine that drives another pulley are studied in this model. A parametric analysis is conducted in order to study how the rotational speed affects the stress distribution in the pulley. The power at the pulley shaft remains constant, the moment (defined by the ratio of the power by the rotational speed) will thus decrease with increased speed. This ...

Steady-State 2D Heat Transfer with Conduction

This example shows a 2D steady-state thermal analysis including convection to a prescribed external (ambient) temperature. It is given as a benchmarking example. The benchmark result for the target location is a temperature of 18.25 C. The COMSOL Multiphysics model, using a default mesh with 556 elements, gives a temperature of 18.28 C. Successive uniform refinements show a temperature of ...

Pacemaker Electrode

This model illustrates the use of COMSOL Multiphysics for modeling of ionic current distribution problems in electrolytes, in this case in human tissue. The problem is exemplified on a pacemaker electrode, but it can be applied in electrochemical cells like fuel cells, batteries, corrosion protection, or any other process where ionic conduction takes place in the absence of concentration ...