Parametric Study of Polyimide - Lead Zirconate Titanate Thin Film Cantilevers for Transducer Applications
A. Arevalo, I.G. Foulds
King Abdullah University of Science and Technology, Thuwal, Kingdom of Saudi Arabia
The simulation of the piezoelectric actuation of the micro-cantilever is presented. Lead Zirconate Titanate (PZT) was chosen for the device ...
T. Kaya, B. Shiari, K. Petsch, and D. Yates
Central Michigan University, School of Engineering and Technology, Mount Pleasant, MI
University of Michigan, Dept. of Electrical Engineering and Computer Science, Ann Arbor, MI
In this work, a MEMS low-g accelerometer with three sensitive directions is designed for health monitoring applications. The accelerometer may have ...
B. Cahill, A. Giannitsis, G. Gastrock, M. Min[1,2], and D. Beckmann
Institut für Bioprozess- und Analysenmesstechnik e.V., Heiligenstadt, Germany
 Department of Electronics, Tallinn University of Technology, Tallinn, Estonia
Electrowetting occurs with the electrical control of the surface wetting properties through the application of an electric potential. A simulation of ...
A. Arevalo , D. Castro , D. Conchouso , I. G. Foulds 
 Computer, Electrical and Mathematical Sciences and Engineering (CEMSE), King Abdullah University of Science and Technology (KAUST), Saudi Arabia
 The University of British Columbia, School of Engineering, Okanagan Campus, Saudi Arabia
For our simulation we used the Piezoelectric Devices interface. The structure was set with (clamped) fix constraint boundaries to both ends. The bottom ...
S. Kundu , H. B. Nemade ,
 Indian Institute of Technology Guwahati, Guwahati, Assam, India
The paper presents simulations of uniform thickness and thickness-tapered types of piezoelectric vibration energy harvesters using COMSOL Multiphysics ...
Primary Current Distribution Model for Electrochemical Etching of Silicon through a Circular Opening
A. Ivanov , U. Mescheder ,
 Hochschule Furtwangen University, Furtwangen im Schwarzwald, Germany
Primary current distribution model for anodization of low-doped p-type silicon through a circular opening in frontside insulating mask is developed. ...
A. Arevalo , D. Conchouso , D. Castro , M. Diaz , I. G. Foulds ,
 CEMSE Division, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
 Physical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
 University of British Columbia, Vancouver, BC, Canada
INTRODUCTION: Micro Electro Mechanical Systems (MEMS) are fabricated with an in-plane fabrication technology. Out-of-plane structures can be designed ...
P. Priya , B. D. Pant ,
 Birla Institute of Technology and Science Pilani, Pilani, Rajasthan, India
 CSIR-Central Electronics Engineering Research Institute, Pilani, Rajasthan, India
In this paper, a free membrane is used as a receiver to increase the capacitance and therefore the resolution of the flow meter. For the current ...
Design and Simulation of High-Throughput Microfluidic Droplet Dispenser for Lab-on-a-Chip Applications - new
C. Jin, X. Xiong, P. Patra, R. Zhu, J. Hu
Department of Biomedical Engineering, University of Bridgeport, Bridgeport, CT, USA
Department of Electrical and Computer Engineering, University of Bridgeport, Bridgeport, CT, USA
Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
Digital Microfluidic Biochip (DMFB) has been widely used in Lab-on-a-Chip (LoC) for disease diagnosis and treatment applications. To quickly convert ...
M. Kaushik , S. Katti , V. Saradesai , P. Naragund , P. Vidhyashree , A. K. V. Nandi 
 B.V. Bhoomaraddi College of Engineering and Technology, Hubli, India
This article describes the design of MEMS based cantilever structure intended for determination of blood group and it is compared with manual method. ...